AMSOIL Bypass Filtration

It has been shown time and time again that with the use
of AMSOIL's Bypass Filtration system and regular
monitoring through oil analysis, engine oil can maintain its
viscosity for extended periods (even past 60,000 miles)!
Considering some trucks may require 10 or more
quarts of oil per change, this is a huge money-saving
product.

Not only will it save you tons of money in oil changes, it
will give you the best possible engine protection. These
filters have an unheard of efficiency of 98.7% at two
microns! In addition to keeping the oil free of virtually all
wear-causing particles, AMSOIL Bypass Filters also
contain a soot removal device that removes 39% of soot
contaminants less than one micron in diameter!

Working in conjunction with the engine's regular full-flow
filter, the AMSOIL Bypass Filter operates by filtering oil
on a "partial-flow" basis. It draws approximately 10% of
the oil pump's capacity at any one time and traps the
extremely small, wear-causing contaminants that regular
full-flow filters cannot remove. The AMSOIL Bypass
Filter typically filters all the oil in the system several
times an hour, so the engine continuously receives
analytically clean oil. These filters offer the ultimate in
protection against wear, oil degradation, rust and
corrosion.

How would you like to go 60,000 miles or more without
changing the oil in your gasoline or diesel truck?

How is this possible? AMSOIL's Bypass Filtration system
installed in typical gasoline and diesel vehicles allows you
to extend drain intervals by filtering soot and the most
damaging particles from your engine oil.

By-Pass Filtration Benefits

Dramatically Extended Oil Drain Intervals: Customers save money by changing oil
less often.
Improved Oil Cooling: Engines run cooler, which helps reduce wear on expensive
equipment.
Increased Filtration Capacity and Life: Oil is filtered more effectively, thus
removing more wear particles and reducing the contaminants that cause engine
damage.
Increased Fluid System Capacity: The engine has more oil available to lubricate,
cool and protect.
Efficient Small Particle and Soot Removal: Removes more of the contaminants
that can cause engine wear and premature damage to engines.
Equipment Constantly Runs on Clean Oil: Equipment is better protected and will
last longer.
Increased Engine Efficiency: Better performance through reduced engine wear.
Remove Particles Less Than One Micron: Reduces the small wear-causing
contaminants and soot that cannot be removed by full-flow filters.

Dual Remote Filter Systems
The AMSOIL Dual Remote Oil Filtration System converts an engines full-flow oil filter system into a
full-flow/by-pass oil filtration system by attaching an AMSOIL Full-Flow Oil Filter and AMSOIL Spin-On
By-Pass Oil Filter onto a remote mount. The Dual Remote System provides superior filtration
efficiency, increased oil capacity and improved oil filtration accessibility. See the G1092 brochure for
more info on the Dual Remote Filtration System.

1. Special adapters and hardware may be required for some installations. A universal mounting
bracket is included with the kit, however, custom brackets may be required depending on your
vehicle's equipment options or personal preferences in mounting locations."

2. Contact AMSOIL INC. Technical Service at (715) 399-TECH (8324) for instructions before installing
on vehicles with cast aluminum oil pans.

All materials contained on this site are the property of Genuine Synthetics or AMSOIL Inc. and are protected
by International copyright law. They may not be reproduced, distributed, transmitted, displayed, published or
broadcast without permission. You may not alter or remove any of the content. However, you may download
material from our web site for your personal, noncommercial use only.
Genuine Synthetics, Oklahoma City, Oklahoma